Posts Tagged ‘Z06 Transmission’

TR-6060 Transmission Rebuild

Today we will be going over one of our manual 6 speed TR-6060 transmission rebuilds. This manual transmission is from a 2008 Chevrolet C6 Corvette Z06. This style TR-6060 transmission is correct for the 2008-2013 Chevrolet Corvette Z06 models.
DSC05906 DSC05907


To start this build out, we first secure the transmission so it will not move while we work on it. From here we start to remove the end cover as shown to get into the internals.
DSC05924 DSC05927 DSC05931 DSC05941


With the cover removed we can start taking the gears out one at a time. With those internals removed we can then removed the center housing and set it to the side.
DSC05944 DSC05947 DSC05993 DSC05999


With the center case removed, we can start tearing down the remaining internals. Once those are done we have finished the dismantling of the transmission and are now ready to start the rebuild.
DSC06006 DSC06054


Now with the rebuild of this transmission about to begin, you need to make sure you have your replacement parts ready to go. For our build we decided to replace all the syncros, both the input and counter shaft. We also replaced the front cover as well as the pump that is mounted to it. Do not forget as with any rebuild that gets done you should replace all the seals and with this one we even upgraded the blocker rings on this transmission.
DSC06060


As we stated in the last step, we ended up upgraded the blocker rings to a carbon blocker ring set. The picture shows the old style on the left and the new carbon ones on the right. We replaced both input and counter shaft due to the old ones showing signs of ware when we started the build.
DSC06286 IMG_20151209_140331536_HDR


At this point we start to install the first set of internals back onto the base plate. Its very important to make sure that each part gets installed in the correct order.
DSC06263 DSC06406


With this section of the internals installed the center case is then placed back onto the base plate and bolted back down. Everything should fit together just right if it was put back together correctly.
DSC06393 DSC06416


Now with the center section of the case snugged down, we can start installing the next set of internals. Again make sure that everything goes back in the correct order.
DSC06554 DSC06873


At this point the final thing to do is reinstall the last section of the housing. This then finishes the whole build from start to finish.
DSC06876 DSC05896


As always, feel free to email or call us with any questions at clevelandpap@yahoo.com and 866-236-5031.

Thanks for reading!

Project Blog

2008 Dodge Charger SRT-8 Super Bee w/60k

  NEW ARRIVAL: 2008 Dodge Charger SRT-8 Super Bee w/60k *6.1L AUTO ENGINE TURN KEY PACKAGE IS SOLD** Brembo Brake Upgrade Wheels Hood Front Bumper Cover Rear Bumper Rear[...]

2018 Challenger SRT w/ 2k miles

NEW ARRIVAL: 2018 Dodge Challenger SRT w/ 2,000 miles **6.4L HEMI ENGINE PACKAGE SOLD** Wheels Brembo Brakes Center Tail Light Seats Center Console Bilstein Suspension Upgrade Exhaust Spoiler Fuel[...]

2017 Dodge Charger R/T Scat Pack w/ 13k miles

NEW ARRIVAL: 2017 Dodge Charger R/T Scat Pack w/ 13k miles **392 HEMI ENGINE PALLET AVAILABLE** Hellcat Front Clip Brembo Brake Upgrade Center Console 8.4" Infotainment Screen Door Panels[...]

Facebook

Contact

Contact Column

Cleveland Power & Performance (formerly Cleveland Pick-A-Part) is the U.S. leader in late-model auto parts, rolling chassis, rebuilt/restored vehicles and more.

12420 North Station Road, Columbia Station, OH 44028

 
Contact Us Mon-Fri 8am-5pm EST
(866) 236-5031
Email inquiries power@clevelandpap.com

Get the latest updates from Cleveland PAP

  


Choose Language:

© Copyright 2018 Cleveland Power & Performance. All Rights Reserved.
Made with pride in Cleveland, OH USA.