Posts Tagged ‘Transmission Build’
TR-6060 Transmission Rebuild
Today we will be going over one of our manual 6 speed TR-6060 transmission rebuilds. This manual transmission is from a 2008 Chevrolet C6 Corvette Z06. This style TR-6060 transmission is correct for the 2008-2013 Chevrolet Corvette Z06 models.
Now with the rebuild of this transmission about to begin, you need to make sure you have your replacement parts ready to go. For our build we decided to replace all the syncros, both the input and counter shaft. We also replaced the front cover as well as the pump that is mounted to it. Do not forget as with any rebuild that gets done you should replace all the seals and with this one we even upgraded the blocker rings on this transmission.
As we stated in the last step, we ended up upgraded the blocker rings to a carbon blocker ring set. The picture shows the old style on the left and the new carbon ones on the right. We replaced both input and counter shaft due to the old ones showing signs of ware when we started the build.
With this section of the internals installed the center case is then placed back onto the base plate and bolted back down. Everything should fit together just right if it was put back together correctly.
As always, feel free to email or call us with any questions at email@example.com and 866-236-5031.
Thanks for reading!