Posts Tagged ‘Torque Tube’

1997-1999 Chevrolet C5 Corvette Manual Torque Tube 10MM Bushing Swap

Today We will be going over what you need to do to swap your 10mm bushing inside of any 1997 to 1999 manual Chevrolet C5 Corvette torque tube.
Torque Tube


First you will need to disassemble the torque tube, to do so just follow these steps.
First you will need to remove the bolts from the rear bell housing at the back of the part. Where the Bolts are located are highlighted in blue.
Highlight_1 1997-1999 Chevrolet C5 Corvette Manual Torque Tube 10MM Bushing Swap


Once this is done you will need to pull the housing of the torque tube off.
1997-1999 Chevrolet C5 Corvette Manual Torque Tube 10MM Bushing Swap 1997-1999 Chevrolet C5 Corvette Manual Torque Tube 10MM Bushing Swap
1997-1999 Chevrolet C5 Corvette Manual Torque Tube 10MM Bushing Swap


From here you will need to separate the drive shaft from the rear bell housing and the input shaft. There will be three ( 3 ) bolts through the bushing that you can reach.
1997-1999 Chevrolet C5 Corvette Manual Torque Tube 10MM Bushing Swap 1997-1999 Chevrolet C5 Corvette Manual Torque Tube 10MM Bushing Swap
1997-1999 Chevrolet C5 Corvette Manual Torque Tube 10MM Bushing Swap


 

Once the drive shaft is by itself you can then access the other three (3 ) bolts holding the bushing on.
Highlight_2 Highlight_3 Highlight_41997-1999 Chevrolet C5 Corvette Manual Torque Tube 10MM Bushing Swap


Now that the torque tube is apart and the bushing is now removed you can begin to install the new bushings.


1997-1999 Chevrolet C5 Corvette Manual Torque Tube 10MM Bushing Swap


 

First you will need to start to bolt on the new bushing on to the drive shaft and input shaft. You can throw away the old bushing at this time as they are no longer needed.

1997-1999 Chevrolet C5 Corvette Manual Torque Tube 10MM Bushing Swap 1997-1999 Chevrolet C5 Corvette Manual Torque Tube 10MM Bushing Swap
1997-1999 Chevrolet C5 Corvette Manual Torque Tube 10MM Bushing Swap


 

From here the next step will be to torque down the bolts through the bushing to 66.0
Torque




Once all the bolts are torqued down you will need to reinstall the drive shaft into the rear bell housing.

1997-1999 Chevrolet C5 Corvette Manual Torque Tube 10MM Bushing Swap


 

Now the final step is to slide the torque tube housing back over the drive shaft and bolt it on to the rear bell housing.
1997-1999 Chevrolet C5 Corvette Manual Torque Tube Manual Torque Tube


 

At this point your torque tube is ready to be reinstalled in your Chevrolet C5 Corvette. As always, fell free to email or call us with any questions
Clevelandpap@yahoo.com and 866-236-5031

Thanks for reading!

Project Blog

2011 Camaro SS w/ 111k

  NEW ARRIVAL: 2011 Camaro SS w/ 111k **LS3 Engine & 6 Speed Manual Trans Turn Key** Seats Wheels Rear Bumper Tail Lights Door Panels Console 3.45 Rear Differential[...]

NEW ARRIVAL: 1968 Ford LTD

NEW ARRIVAL: 1968 Ford LTD

2002 C5 Corvette w/ 44k

  NEW ARRIVAL: 2002 C5 Corvette w/ 44k **LS1 Auto Rolling Chassis or Go Kart** Sport Seats Left Door Left Quarter Left Door Mirror Left Fender Headlights Radio Dash[...]

Facebook

Contact

Contact Column

Cleveland Power & Performance is the U.S. leader in late-model auto parts, rolling chassis, restored vehicles and custom auto upholstery.

12420 Station Road, Columbia Station, OH 44028

 
Contact Us Mon-Fri 8am-5pm EST
(866) 236-5031
Email inquiries power@clevelandpap.com
SALES TEAM
TIM - 440-236-4225
MIKE M - 440-236-4223

Get the latest updates from Cleveland PAP

  


Choose Language:

© Copyright 2022 Cleveland Power & Performance. All Rights Reserved.
Made with pride in Cleveland, OH USA.