Posts Tagged ‘Manual Corvette’
1997-1999 Chevrolet C5 Corvette Manual Torque Tube 10MM Bushing Swap
First you will need to disassemble the torque tube, to do so just follow these steps.
First you will need to remove the bolts from the rear bell housing at the back of the part. Where the Bolts are located are highlighted in blue.
Now that the torque tube is apart and the bushing is now removed you can begin to install the new bushings.
First you will need to start to bolt on the new bushing on to the drive shaft and input shaft. You can throw away the old bushing at this time as they are no longer needed.
At this point your torque tube is ready to be reinstalled in your Chevrolet C5 Corvette. As always, fell free to email or call us with any questions
Clevelandpap@yahoo.com and 866-236-5031
Thanks for reading!