Posts Tagged ‘Fourth Gen Swap’
83 Trans Am custom build with Fourth Gen LS1 swap Part II
Cleveland Power and Performance is proud to present this 83 Trans Am custom build with Fourth Gen LS1 swap, which will show you how easily you can update your Gen 3 F-Body with a ton of bolt on Gen 4 Parts! We will be incorporating an LS1 Driveline swap, updated to larger disc brakes, a fourth gen Trans AM Interior, and incorporating every piece of a late model Trans AM into this classic beauty! Long live the 80s!
In the last installment of our 83 Trans Am LS1 swap blog we started off by showing how we received the Trans Am. We received a stock, 5.0L 83 Trans Am with the goal of swapping as many components out of a Fourth Gen as possible. We are going to build this 83 into a modern upholstered, fuel injected, tribute to the awesome era that was the 80’s!
In our last blog we left off with basically a bare shell with no interior and no driveline. We have since started to replace the old with the new. Take a look at the pictures below showing the modifications that we have done to the front cradle to allow for the fitment of the LS1 engine
We also opted to put bigger brakes on the TA to give it some more stopping power. We ordered a kit from bigbrakeupgrade.com that allows us to use fourth gen calipers and rotors on the front by modifying the stock 83 spindles.
The brake kit made installation a breeze and is a huge upgrade in both form and function.
We also began plans on modifying the firewall to allow for the installation of the fourth gen heater box, ac components, brake system and more.
Next we will begin mocking up the engine and blueprinting the underhood compartment to figure out where we are going to run our harness, ac lines, etc.
Stay tuned to our blog to see this car come to life.