Ultra Rare Limited Production Factory Vehicles That Have Been Given a Second Life!

Tags: ACR, Anniversary, Challenger, Charger, Chevrolet, Cleveland Power & Performance, Collectors Edition, CORVETTE, Dodge, Firehawk, GTS, Mamba, Performance, Pontiac, Rare Cars, Special Edition, SRT-8, Super Bee, Viper, Z06 | Category: Blog

Here at Cleveland Power & Performance, we have had quite a few ultra rare, limited production factory high performance vehicles. Most have been wrecked beyond repair, but we have repaired quite a few and put them back on the road! The one’s that had a dead title or were beyond repair we still given a second chance by our facility!

Whether sold as a donor car, a rolling chassis, a turnkey pallet, or just a complete engine and transmission drop out, here at Cleveland Power & Performance we promise to ALWAYS ensure these limited number vehicles are re-purposed for their second coming in a custom project or repair! As of 2016, these are the vehicles we’ve received that we feel are quite rare based on total production. Stay tuned next year for a new list of rare cars we’ve acquired!

Below you will find a list, detailing the vehicle and what makes it rare, our stock number, the vin, and what the total production was. Entries with an “X” in front of the year are pictured below!

X 2005 Ram 1500 SRT-10 Viper Yellow Fever Quad Cab – 14-052 –
3D3HA18H35G740233 – 1 of 500 total

X 2005 Ram 1500 SRT-10 Viper Commemorative Edition – 13-064 –
3D7HA16H95G858885 – 1 of 200 total

X 2005 Ram 1500 SRT-10 Viper Commemorative Edition – 13-212 –
3D7HA16H75G858934 – 1 of 200 total

2006 Ram 1500 SRT-10 Viper Night Runner – 12-053 –
3D3HA16H76G269305 – 1 of 400 total

X 2006 Ram 1500 SRT-10 Viper Night Runner – 09-328 –
3D3HA18H56G269140 – 1 of 400 total

X 2010 Furious Fuchsia Challenger SRT-8 – 13-023 –
2B3CJ7DW0AH296248 – 1 of 400 total

2001 Yellow Viper GTS ACR – 10-026 –
1B3ER69E41V703202 – 1 of 89 total

X 2008 B5 Blue Pearl Coat Charger SRT-8 Super Bee – 14-043 –
2B3LA73W38H164001 – #614 of 1000

2008 B5 Blue Pearl Coat Charger SRT-8 Super Bee – 15-134 –
2B3KA73W98H163768 – 1 of 1000

X 2008 B5 Blue Pearl Coat Charger SRT-8 Super Bee – 14-057 –
2B3KA73W08H164100– 1 of 1000

2004 Viper Mamba Convertible – 10-290 –
1B3JZ65Z54V102179 – 1 of 200

2004 Viper Mamba Convertible – 10-131 –
1B3JZ65Z84V101267 – 1 of 200

X 2005 Viper Mamba Convertible – 15-002 –
1B3JZ65Z45V501196 – 1 of 200

X 2003 Viper from Fast & The Furious: Toyko Drift – 07-146 –
1B3JR65ZX3V501572 – 1 of 1

X 2013 Corvette C6 Z06 427 Convertible w/ 427 package – 13-002 –
1G1YY3DE9D5700216 – 1 of 427

1992 Corvette ZR1 in Black Rose Metallic – 14-126 –
1G1YZ23J4N5800165 – 1 of 48

2011 Toxic Orange Challenger SRT-8 – 15-198 –
2B3CJ7DJ7BH552987- 1 of 357

X 2010 Arctic White Corvette C6 Z06 – 15-006 –
1G1YK2DEXA5107164 – 1 of 184

X 2002 Corvette Mallet Hammer C5 Z06 383 Stroker – 15-076 –
1G1YY12S525128748- 1 of 6!

X 2011 Challenger SRT-8 392 w/ 392 Package – 13-037 –
2B3CJ7DJXBH501449 – 1 of 1492

1997 Corvette C5 “Bowling Green” Fairway Green Metallic – 06-189 –
1G1YY22G2V5100184 – 1 of 155

X 2008 Corvette C6 Hertz Sales Package – 08-299 –
1G1YY26W285130534 – 1 of 500

2001 Pontiac Firebird Firehawk – 13-234 –
2G2FV22G312144471 – 1 of 504

2002 Pontiac Firebird Trans AM Collector’s Edition – 05-190 –
2G2FV32G322145109 – 1 of 554

1996 Corvette C4 LT4 Convertible Collector’s Edition – 08-022 –
1G1YY3259T5116951 – 1 of 1,290

1996 Corvette C4 LT4 Coupe Collector’s Edition – 08-110 –
1G1YY2252T5110788 1 of 1,540

2006 Viper Coupe GTS Blue Special Edition – 09-050 –
1B3JZ69Z56V100316 – 1 of 424

2008 Dodge Magnum SRT-8 – 11-219 –
2D8GV77398H193430 – 1 of 239

2006 Chrysler 300C Classic Design Concepts #1 Glassback Roof Car – 15-182 –
2C3LA73W46H514722 – 1 of 1

X 2002 Camaro Coupe 35^th Anniversary – 09-080 –
2G1FP32G322141284 – 1 of 934

2002 Camaro Coupe 35^th Anniversary – 08-214 –
2G1FP22G122120475 – 1 of 1,037

2002 Camaro Convertible 35^th Anniversary – 04-225 –
2G1FP32G122122538 – 1 of 789

1994 Firebird Trans AM 25^th Anniversary – 08-008 –
2G2FV22P4R2233672 – 1 of 1,412

1994 Firebird Trans AM 25^th Anniversary – 08-203 –
2G2FS22S0R2247162 – 1 of 1,412

1994 Firebird Trans AM 25^th Anniversary – 10-292 –
2G2FV22P7R2240020 – 1 of 1,412

X 2004 Corvette Z06 Z16 Commemorative – 05-368 –
1G1YY12S945125001 – 1 of 2,025

2005 Silverado 1500 Regency RST Conversion – 06-244 –
1GCEC14V75Z336238 – 1 of < 200

X 2009 Pontiac G8 GT GXP – 09-229 –
6G2EP57WX9L303167 – 1 of 1,828

2009 Pontiac G8 GT GXP – 13-155 –
6G2EP57W29L300053 – 1 of 1,828

2009 Pontiac G8 GT GXP – 14-168 –
6G2EP57W99L310255 – 1 of 1,828

2005 Ford GT –
1FAFP90S25Y400149 – 1 of 2,027

1999 Viper GTS-R Built by Hennessey – 09-107 –
1B3ER69E8XV502685 – 1 of ???

2004 Dodge Viper 8.3L Engine SRT-10 15K Driving Donor Chassis 500HP Wrecked Rebuildable Chassis – $17,995

Tags: 8.3L, Cleveland Power & Performance, Dodge, Donor Car, Donor Vehicle, Engine, Running & Driving, Viper | Category: Donor Car Conversions

Cleveland Power and Performance is proud to present this 2004 Dodge Viper SRT-10 run and drive donor car. This car is complete with interior, suspension, cooling, and the 500 horsepower 8.3L V10 Engine. Our customers have used these donors in everything from classic Mopar builds to modern custom kit cars. This Viper could also be a perfect transplant to repair your wrecked Vehicle. This Viper donor has ONLY 15,XXX actual miles on it!

CLICK THIS LINK TO SEE PHOTOS OF THE DONOR BUILD FROM START TO FINISH

This vehicle was involved in a front end collision. The Vehicle was put on our frame machine and the left hand rail was pulled to allow the suspension to be installed. There is a dent in the left hand rail where it meets the cowl, as pictured.

Please make sure to look at all of the pictures below, as well as in the link provided above.

HERE IS THE VIN FROM THIS VIPER 1B3JZ65Z14V102406

This Viper carries an Ohio CERTIFICATE OF DESTRUCTION title.

This 2004 Viper donor vehicle which will include the following:

8.3L V10 Engine with 500hp

Complete OEM dash, digital speedometer, radio, heater controls, and everything as pictured.

OEM Viper Black leather and suede seats and complete interior as pictured. The interior shows signs of normal use, as pictured.

The fuel tank assembly w/ pump including the charcoal canister

Complete OEM exhaust system with mufflers

OEM 3.07 ratio differential

OEM T-56 6 speed manual transmission

Complete cooling w radiator, cooling fan, and condenser

Complete front and rear suspensions with shocks, brakes, and more.

OEM Viper wheels on Michelin Pilot Sport tires. The front are size 275/35/18 and the rears are 345/30/19.

CHECK THE EXPORT LAWS TO SEE IF YOU CAN GET THIS VEHICLE INTO YOUR COUNTRY

WE HAVE A CUSTOM ENCLOSED DELIVERY TRAILER TO BRING THIS VIPER TO YOUR LOCATION! CONTACT US FOR A QUOTE!!

The VIPER is SOLD AS IS. NO CREDIT CARDS ALLOWED ON VEHICLE PURCHASES.

Stock: 15-112 T

2010 Challenger SRT-8 6 Speed Donor

Tags: 6 Speed, Challenger, Cleveland Power & Performance, Dodge, donor, Donor Car, Donor Vehicles, SRT-8 | Category: Blog

Looking for the perfect donor vehicle for your one off custom project? Something to really set your vehicle apart? Look no further than the worlds first and only run and drive 2010 Challenger SRT-8 6 speed donor out there. Whether you are looking to restore your late model Challenger or Charger this donor offers everything you could possibly want.

The highly sought after 425 horsepower 6.1L Hemi engine and attached to it the 6 speed manual Tremec TR6060 transmission.

You will also get the comfortable ride of Bilstein suspension and the stopping power of Brembo brakes all the way around.

Update your interior as well with leather and suede seats, digital gauges, and navigation.

This being a run and drive donor vehicle you will receive all VIN matched wiring and components for installation in your custom application to get everything to communicate which is key when dealing with Chrysler vehicles. Why settle for just an engine package or just interior when doing a one off custom build? With this donor you will get everything you need and more to make your build one of a kind.

Check out all the photos and video of this driving here. Please feel free to give us a call at 866-236-5031 with any questions on it.

2010 Dodge Challenger SRT-8 rebuild

Tags: Build, Challenger, Cleveland Power & Performance, Dodge, HEMI, REBUILD, Restoration, SRT-8 | Category: Rebuilds

Cleveland Power and Performance is back at it again, rebuilding domestic high performance cars to save you thousands! Stay tuned to our blog feed to see many exciting rebuilds in the future, but for now we will be highlighting our latest project a beautiful 2010 Dodge Challenger SRT-8 rebuild!

This SRT-8 Challenger was involved in a front end collision, which resulted in it being branded with a salvage title. Below you will see the complete rebuild from the time the vehicle got here, to its completion. This Challenger now carries a fully transferable salvage rebuilt title and is for sale ready to head to a good home.

Here are some photos of the challenger as we received it at our facility.

As you can see from the pictures, this vehicle took a front end shot but was hit high which did not deploy the airbags or result in and damage to the engine or driveline. We get many late model SRT vehicles in here and part a good amount of them out, however we thought this vehicle deserved to be fixed properly and put back on the road. The SRT brand has a cult like following and many Mopar fans love the raw power of the 6.1L engine and the iconic looks of this Challenger. As always, we at Power and Performance aim to set ourselves above the rest when repairing wrecked vehicles. We do not cut corners or spare expensive when doing a rebuild.

After racking the vehicle on the lift and looking at the frame rails and the suspension, we determined that the best way to fix this vehicle was to replace the lower frame rails and use a complete front suspension from an unit donor. Here are the pieces we used to fix this Challenger before we put the car on the frame machine.

We then put the Challenger on the frame machine to cut and remove the damaged rails to begin the nitty gritty of the rebuild process, the measuring and welding.

Here is what the Challengers frame looked like underneath the damaged body panels.

We the removed the damaged frame and apron area at the proper locations to allow the installation of the undamaged frame components.

After the left hand frame rail and bumper bar were welded in, the aprons and header panel were put in place.

Once all of the frame and apron components were properly installed it was time to paint them with factory Chrysler paint.

Now that the car was structurally sound and painted to match, she was taken off the frame machine to have the driveline, suspension and cooling components re installed.

With the driveline installed, and the suspension bolted up and in place the car was ready to have the outside sheet metal hung on. We used parts off on un-hit front end to finish this car. They were installed on the Challenger and the sent to paint.

Here are some finished photos of the Challenger.

This challenger is now fully rebuilt and has been inspected by the Ohio State Highway State Patrol and has been given a rebuilt salvage title. Since completing the build we have put over 500 Challenger and she is ready for a new home. If you are interested in purchasing this vehicle for thousands less than comparable models, please call us at 866-236-5031 and for more details click the link HERE

Brembo or BremNO????

Tags: Brake Upgrade, Brembo, Challenger, Charger, Chrysler, Dodge, Magnum, SRT-8 | Category: Blog

What are Brembo calipers? What do they do? Will it make my car stop faster? Those are common questions that come to mind when customers ask me about Brembo calipers.

Common cars that carry the Brembo brake upgrade are SRT-8 300’s, Challengers, Chargers, and Magnums. These are the most powerful V8 vehicles that the Chrysler Group has came out with. These cars are so powerful that they require a brake system of commensurate capability as standard equipment. Design imperatives were excellent braking performance under every conceivable operating condition – from high speeds to track day, communicative pedal feel enabling precise modulation and control, and superior heat dissipation to keep brake efficiency optimized and sustainable, especially under extreme usage.

The basic models would be SE or SXT, which have a 3.6L V6 engine with 250-305 horsepower have the 4 wheel Anti Lock Disc Brakes. The RT models have 5.7L V8 Hemi engine with 375 horsepower and have the Heavy Duty High Performance Brakes.The SRT-8 models have 6.1L or 6.4L engine with horsepower ranging from 425-470. These come with the Brembo Performance Brakes.

A lot of people who own the SXT or the RT models will generally upgrade their brake system to the Brembo Performance simply because they custom built there engine to have more horsepower and they need the support. Most of the time they will upgrade because they simply look a lot better. If you are looking into upgrading your SXT base model or RT model, you cannot just plug and play with Brembo Performance Brakes.

To upgrade your brakes on the base SXT model and RT,you will need at least a 20″ wheel for clearance, hubs, spindles, knuckles, and rotors.

The rotors are different from RT and SRT-8, RT rotors measure out to approximately 13.6 diameter and 1.15 thick. The SRT rotors measure out to approximately 14.20 and 1.26 thick.

Here are some photos of how much different each caliper is:

Brembo:

Regular:

SRT-8 SPINDLE & HUB:

2007 Dodge Charger SRT-8 6.1L Rebuild FINISHED! Completed Photos, and for sale!

Tags: 6.1L, Charger, Charger SRT-8, Cleveland Power & Performance, Dodge, HEMI, Hemi 6.1L, Project, REBUILD, SRT-8 | Category: Blog

See the build pictures here:
https://www.clevelandpap.com/salvage-2007-dodge-charger-srt-8-6-1l-rebuild-from-start-to-finish/

See the eBay auction containing this vehicle FINISHED and FOR SALE here:
https://www.ebay.com/itm/Dodge-Charger-SRT8-Sedan-4-Door-/391150345168

Cleveland Power and Performance is proud to present this rebuilt 2007 Dodge Charger SRT-8! This Charger is fully loaded with all of the features that you would expect from the SRT brand. This Charger has only 53K miles on it! This is your chance to save thousands on a clean SRT Charger!
We purchased this Charger with front end damage and an Ohio salvage title. We have since fully repaired the collision damage and had this vehicle inspected by the Ohio state highway patrol. This Charger now carries a fully insurable salvage rebuilt title that can be transferred to any US state.

We put lower frame rails, a front bumper bar and header panel on this Charger from a donor vehicle. We also used front fenders and a front bumper from a donor Charger and painted to match the car. The air bags deployed in this Charger. We have since installed airbags and seat belts from the donor vehicle. You can see the link above for the build and progress photos.

We have also done some preventative maintenance on this vehicle and replaced some common wear items. We have installed new intake gaskets, new brake pads, and new rotors. We changed the oil using Mobil 1, the tires have been spun and balanced and, the vehicle has been aligned.

The car runs, drives, starts, and stops like it should. There are no active lights on the cluster and we have put over 500 test miles on it since it has been repaired.

Here are the finished pictures, inside and out:

Salvage 2007 Dodge Charger SRT-8 6.1L Rebuild from start to finish!

Tags: 6.1L, Charger, Charger SRT-8, Cleveland Power & Performance, Dodge, Project, REBUILD, Salvage, SRT-8 | Category: Blog

We received this Salvage titled 2007 Dodge Charger SRT-8 with front end damage and only 52k actual miles. Upon further inspection, it appeared to be in very good condition, and we had most of the parts to fix it here. We will be replacing the damaged parts on this car and offering it for sale, completely finished. This Charger SRT-8 is going to be a great opportunity for someone to save thousands over buying used. This Charger features the 6.1L V8 engine, automatic transmission, leather interior, navigation, Brembo Brakes, and much more. We will be fully inspecting the vehicle, and taking it through State Inspection to get a rebuilt title for the next owner.

Here are some photos showing the Charger as we received it.

As you can see from the pictures, this Charger SRT-8 only suffered front end damage, and the interior is very clean. Here are some pictures of it on the frame machine, and getting painted, then the engine put back in:

New and Improved 5TH Gen Camaro SS and Challenger SRT-8 WALL ARTS!

Tags: Camaro, Camaro SS, Challenger, Chevrolet, Cleveland Power & Performance, Dodge, Lighting, Man Cave, Road Art, Wall Art, Wall Hanger | Category: Blog

Cleveland Power and Performance is proud to re-release our one of a kind 5th Gen Camaro and Dodge Challenger SRT-8 fully lit bumper wall arts!

We have gotten tons of requests for advanced features on these bumpers, and a little r and d completely we now have a new supplier that has added many requested features!

Want to make your garage (or any other flat surface) REALLY stand out? With our new and improved rear bumper wall art, you will receive:

• Rear Bumper Assembly – Trimmed and Cut to sit flush against your wall!
• OEM Lights w/ Quarter Panel Cuts
  
• OEM Spoiler w/ Trunk Lid Cut
• OEM Rear Bumper Diffuser
• OEM Exhaust Tips
  
• Custom Plug in Wiring Harness with AC/DC Converter
• Custom Wireless Power Control and Dimmable Key Fob
  
• High brightness, Low Draw LED Lights In All Locations
• Custom Made Aluminum Bracket to Mount On Wall
  
• Rubber Trim to Protect Surface Mounted Against

HERE ARE SOME PHOTOS OF THE DODGE CHALLENGER SRT-8 REAR BUMPER WALL ART THAT HAVE IN STOCK!

THIS DODGE CHALLENGER WALL ART WOULD BE THE PERFECT ADDITION TO ANY MOPAR ENTHUSIAST MAN CAVE OR GARAGE. OUR WALL ARTS HAVE MADE GREAT BIRTHDAY AND HOLIDAY GIFTS. WE HAVE FITTED THIS WALL ART WITH A LIGHT WEIGHT YET STURDY EASY TO USE MOUNTING SYSTEM. THIS NEW AND IMPROVED SYSTEM ALLOWS FOR EASY AND SIMPLE INSTALLATION AND REMOVAL.

HERE ARE SOME PHOTOS OF THE CAMARO SS REAR BUMPER WALL ART THAT WE HAVE AVAILABLE FOR SALE.

As you can see from our pictures, both of our wall arts have improved mounting systems that can be drilled to fit your specific application. Each of these kits weights just around 70lbs and could be hung just about anywhere you’d like. If you are interested in either of these bumper wall arts or would like to suggest a different vehicle, please feel free to call us at 866-236-5031.

Salvage Dodge Challenger SRT-8 6.1L Rebuild

Tags: 6.1L, Challenger, Cleveland Power & Performance, Dodge, HEMI, Project, REBUILD, SRT-8 | Category: Blog

Follow this blog to see this Salvage Dodge Challenger SRT-8 6.1L Rebuild from start to finish!

We received this Salvage titled 2009 Dodge Challenger SRT-8 with light rear end damage and light interior fire damage. We will be replacing the damaged interior parts on this car and offering it for sale. This Challenger would be the perfect candidate for a custom build or to repair your wrecked challenger. This Challenger features the 6.1l engine, automatic transmission, leather interior, navigation, Brembo Brakes, and much more. We have seen our Challenger donor vehicles used in many very unique custom builds, from Classic Plymouth wagons to the iconic Challengers of the seventies. Our donors have also provided all of the interior, driveline, and electronics on heavy fire and flood damaged Challengers.

Here are some photos showing the Challenger as we received it.

As you can see from the pictures, this challenger suffered no front end damage, and most of the interior was untouched by the rear contained fire. The vehicle did get hit in the rear, which pushed the trunk pan in a bit. We started this rebuild by removing all of the interior, which will allow us to thoroughly clean the trunk and floor pans, as well as inspect the interior for other damage.

We will continue the build by thoroughly cleaning the floor and trunk pans to eliminate and odors caused by the burn. We will also replace several other parts on the challenger that need to be replaced, then test drive the Challenger and ultimately offer it for sale. Stay tuned to our blog to see the finished product. If you are interested in this Dodge Challenger, please give us a call at 866-236-5031 to discuss.

2005 Dodge Viper Clean Title Run and Drive donor Car FINISHED

Tags: 8.3L, Cleveland Power & Performance, Dodge, Dodge Viper, donor, Donor Car, Go Cart, Run & Drive, SRT-10, V10, V10 Engine, Viper | Category: Blog

Follow our blog to see this 2005 Dodge Viper Clean Title Run and Drive donor Car come to life. Like we do with all of our builds, we will post start to finish photos of this Dodge Viper go kart.

We left off with this Viper stripped down to no interior, on the frame machine, ready to be pulled.

We have since pulled the left hand frame rail back to allow the installation of all of the suspension. We rolled the Viper off of our frame machine and on to our steaming pad for a good clean.

We then brought the Viper back into the shop for the installation of the interior and final check over.

Once we have everything ready to go on a donor vehicle, we take it out for a test drive to make sure everything is good to go. We than take the final product out in front of our gates to picture her and put her up for sale. Here she is all finished up.

Cleveland Power and Performance is proud to present this 2005 Dodge Viper SRT-10 run and drive donor car. This Viper carries a clean title! This car is complete with interior, suspension, cooling, and the 500 horsepower 8.3L V-10 Engine. Our customers have used these donors in everything from classic Mopar builds to modern custom kit cars. This Viper could also be a perfect transplant to repair your wrecked Vehicle.This Viper donor has ONLY 9,XXX actual miles on it!

CALL US AT 866-236-5031 WITH ANY QUESTIONS OR TO PLACE ON ORDER ON THIS VEHICLE!

2006 Dodge Magnum SRT-8 Clean Title getting overhauled! Follow this blog to see our Magnum build from start to finish!

Tags: Dodge, HEMI, Magnum, MOPAR, REBUILD, SRT, SRT-8 | Category: Blog

Follow this blog to see this 2006 Dodge Magnum SRT-8 Clean Title getting overhauled!

We had the opportunity to purchase this 2006 Dodge Magnum SRT-8 with a clean title from a repo auction. This Magnum arrived to us with a blown motor, but it will be getting overhauled and put up for sale. Follow this blog to see the build from start to finish, and eventually see this clean title Magnum finished and offered for sale. The dodge Magnum has proven to be one of the rarest and most coveted of the SRT brand. These vehicles seem to have developed a cult following since the end of production nearly 10 years ago. We have had the opportunity to offer a few of these Magnums for sale, but this maybe the nicest and cleanest example to date.

Here are some photos showing the magnum as we received it. As you can see, it has was not involved in a collision, fire, flood, or any total loss. It arrived to us with a blown engine.

The exterior, interior, and all electronic functions are in good shape and fully functional. However, it the engine did not run, so we removed it for inspection. We will be carefully looking over and inspecting all of the drive line, suspension, and power functions of this Magnum and we will repair whatever needs fixed.

The engine was removed and sent to our engine room for inspection. We also had the transmission gone through and inspected to insure that it had no issues.

Please stay tuned to this blog to follow the engine overhaul and completion of this Dodge Magnum SRT-8 clean title rebuild. Once this vehicle is done being rebuilt, and we have put a good amount of test miles on it, she will be offered for sale. Please feel free to give us a call at 866-236-5031 with any questions or to discuss pricing on this awesome 425hp wagon!

2003 Dodge Viper Salvage Donor Ready for sale!

Tags: 500HP, 8.3L, Cleveland Power & Performance, Dodge, Dodge Viper, donor, Donor Car, Project, REBUILD, SRT-10, T-56 Transmission, V10, V10 Engine, Viper, Viper SRT-10 | Category: Blog

Our 2003 Dodge Viper Salvage Donor is done being repaired and is available for sale. To see the first stages of this build, please see the post below. We received this Viper with a light under hood fire and have since repaired all necessary components. In our last post, we showed the first phase of the rebuild including the tear down and first half of the repair process. We have since reassembled the vehicle, performed the final repairs, test drove it and now shes ready for sale. In our last blog entry on this car, we left off with a bare shell. Here is what we did since.

We put the interior and drive line back in the car and replaced all of the parts that were damaged. The outer cowl, harness, computer, dash, drivers seat leather, and left hand front suspension, were all replaced. The cooling has been installed, and the vehicle has been test driven.

This 2003 Viper donor vehicle will include the following

8.3L V10 Engine with 500hp

Complete OEM dash, digital speedometer, radio, heater controls, and everything as pictured.

OEM Viper Black leather and suede seats and complete interior as pictured. The interior shows signs of normal use, as pictured.

The fuel tank assembly w/ pump including the charcoal canister

Complete OEM exhaust system with mufflers

OEM 3.07 ratio differential

OEM T-56 6 speed manual transmission

Complete cooling w radiator, cooling fan, and condenser

Complete front and rear suspensions with shocks, brakes, and more.

OEM Viper wheels on Michelin Pilot Sport tires. The front are size 275/35/18 and the rears are 345/30/19.

Please give us a call at 866-236-5031 with any questions regarding this car, or to place an order on it.

2003 Dodge Viper SRT-10 Salvage Donor

Tags: Chassis, Dodge, Salvage, SRT-10, Viper, Wrecked | Category: Donor Car Conversions

Over the years, we at Cleveland Power and Performance, have transformed many wrecked vehicles into running and driving go-karts for use in resto-mods and custom builds. Follow this blog to see how we turned this lightly burnt car into the prefect platform for any Mopar enthusiast’s project, a 2003 Dodge Viper SRT-10 Salvage Donor. We have seen our Viper donors used in some very wild applications. They have proven to be pretty versatile chassis’ for some of the coolest builds we have seen. Many of these Viper donors also end up on other continents, burning rubber abroad.

We start each and every donor build by striping away of the unnecessary clutter to see what we have to work with. On this viper, all of the body panels and exterior components were removed to reveal the heart and sole of the vehicle. We then remove the drive train to send to our engine room for inspection. The engine and transmission were inspected for any damage. Both were signed off on by our highly trained technicians.

We check all of the suspension components to make sure they are true and straight and replace any parts that are damaged. We do the same with any electronics and wiring that need repaired. On this particular Viper we replaced the left hand front suspension components due to fire damage. We also repaired some harness that was lightly burnt from the fire. The outer cowl, dash, air-box, and several other interior components were also replaced. We ordered and programmed a new engine computer and replaced the radiator with a brand new unit.

Please stayed tuned to our blog for the conclusion of this 2003 Dodge Viper SRT-10 Salvage Donor build! The car should be running and driving in no time at all. Once she is done, she will be offered for sale so let us know if this donor might work in your project.