CLEVELAND POWER & PERFORMANCE IS PROUD TO OFFER THIS 6.2L L99 ENGINE AND AUTOMATIC TRANS TURN KEY DROPOUT. THIS PACKAGE WAS DROPPED OUT OF A 2010 CAMARO SS WITH 50K MILES ON IT! ADD FLUIDS AND SHES READY TO START AND RUN AS IT ARRIVES ON THE FREIGHT TRUCK!!
WE SHIP INTERNATIONAL AND DOMESTIC! PLEASE CONTACT US FOR A SHIPPING QUOTE!
THIS 6.2L L99 ENGINE PRODUCES 400 HP @ 5,900 RPM AND 410 FT-LBS OF TORQUE @ 4,300 RPM
THIS TURNKEY WILL INCLUDE THE FOLLOWING:
6.2L L99 ENGINE
6 SPEED AUTOMATIC TRANSMISSION
BELT DRIVEN ENGINE ACCESSORIES
UNDER HOOD FUSE BOX
TRUNK MOUNTED FUSEBOX
BODY CONTROL MODULE
ANTI-LOCK BRAKE UNIT
FUEL TANK WITH FUEL PUMPS
IGNITION WITH KEY
BODY HARNESS WITH BATTERY CABLES
HERE IS THE VIN FROM THIS CAMARO: 2G1FK1EJ0A9158785
At Cleveland Power & Performance, each motor and transmission are inspected and run tested before we back them with our exclusive 6-month warranty! Before we start each engine, we remove the spark plugs and hand turn the engine over to make sure that no oil has passed the rings. We do a compression test to make sure the piston rings, intake valves, exhaust valves, and head gaskets are properly sealed. We do a vacuum test to make sure there are no burned or sticking intake and exhaust valves, collapsed lifters, or vacuum leaks. We do an oil pressure test at cold start up and warm operating temperature to ensure proper rod bearing clearance and that there are no restrictions in the oiling system. We do a CO test to make sure there are no cracks in the engine block and cylinder heads, and that there are no exhaust gases in the cooling system. We inspect the transmission by draining and inspecting the transmission fluid. We check for any debris or foreign material. If any problems are found, the transmission will be torn down for inspection and repaired as necessary.
Compression was 150 over 140
Oil pressure was 75 pounds cold and 60 pounds warm
Vacuum was a SOLID 21”
CO check PASS
HERE IS A VIDEO OF US RUNNING THIS ENGINE ON THE PALLET: