08 Dodge Viper 8.4L Engine & Manual Trans Turnkey Pallet 11k miles

$17,995.00

1 in stock

SKU: 20-017 ENG Category:

Description

CLEVELAND POWER & PERFORMANCE IS PROUD TO OFFER THIS 8.4L V10 ENGINE AND 6 SPEED TR-6060 6 SPEED MANUAL TRANS TURN KEY DROPOUT. THIS PACKAGE WAS DROPPED OUT OF A 2008 DODGE VIPER WITH ONLY 11K MILES ON IT! ADD FLUIDS AND SHES READY TO START AND RUN AS IT ARRIVES ON THE FREIGHT TRUCK!!

 

WE SHIP INTERNATIONAL AND DOMESTIC! PLEASE CONTACT US FOR A SHIPPING QUOTE!

 

THIS 8.4L ENGINE PRODUCES 600HP @ 6,100 RPM AND 560 FT-LBS OF TORQUE @ 5,000 RPM

 

THIS TURNKEY PALLET WILL INCLUDE THE FOLLOWING:

8.4L V10 ENGINE
TR-6060 6 SPEED MANUAL TRANS
BELT DRIVEN ENGINE ACCESSORIES
ENGINE HARNESS
ENGINE COMPUTER
UNDER HOOD FUSE BOX
BODY CONTROL MODULE
ANTI-LOCK BRAKE UNIT
SPEEDOMETER AND GAUGES
PEDAL ASSEMBLY
FUEL TANK WITH FUEL PUMP
COOLING (FAN ASSEMBLY, RADIATOR, CONDENSER)
AIR CLEANER
 SHIFTER
STEERING COLUMN
PUSH BUTTON START WITH KEY
DASH HARNESS
BODY HARNESS WITH BATTERY CABLES
CATALYTIC CONVERTERS AND MUFFLERS

 

 

HERE IS THE VIN FROM THIS VIPER – 1B3JZ65Z18V201460

 

At Cleveland Power & Performance, each motor and transmission are inspected and run tested before we back them with our exclusive 6-month warranty! Before we start each engine, we remove the spark plugs and hand turn the engine over to make sure that no oil has passed the rings. We do a compression test to make sure the piston rings, intake valves, exhaust valves, and head gaskets are properly sealed. We do a vacuum test to make sure there are no burned or sticking intake and exhaust valves, collapsed lifters, or vacuum leaks. We do an oil pressure test at cold start up and warm operating temperature to ensure proper rod bearing clearance and that there are no restrictions in the oiling system. We do a CO test to make sure there are no cracks in the engine block and cylinder heads, and that there are no exhaust gases in the cooling system. We inspect the transmission by draining and inspecting the transmission fluid. We check for any debris or foreign material. If any problems are found, the transmission will be torn down for inspection and repaired as necessary.

 

Compression was 190 over 185
Oil pressure was 75 pounds cold and 55 pounds warm
Vacuum was a SOLID 19”
CO check PASS

 

HERE IS A VIDEO OF US RUNNING THIS ENGINE ON THE PALLET:

 

 

Project Blog

2015 FORD MUSTANG GT COUPE w/ 32K MILES

NEW ARRIVAL: 2015 FORD MUSTANG GT COUPE w/ 32K MILES **5.0L Coyote 6-Speed Automatic Turn Key Pallet**   R Tail Light Complete Rear Suspension [...]
Read More »

2017 DODGE CHARGER R/T SCAT PACK w/ 21K MILES

NEW ARRIVAL: 2017 DODGE CHARGER R/T SCAT PACK w/ 21K MILES **6.4L HEMI 8-Speed Automatic Turn Key Pallet**   Hood Tail Lights Brembos [...]
Read More »

2006 DODGE MAGNUM SRT8 w/ 74K MILES

NEW ARRIVAL: 2006 DODGE MAGNUM SRT8 w/ 74K MILES **6.1L HEMI 5-Speed Automatic Turn Key Pallet**   Seats Steering Wheel Console Navigation Radio[...]
Read More »

Facebook

Contact

Contact Column

Cleveland Power & Performance (formerly Cleveland Pick-A-Part) is the U.S. leader in late-model auto parts, rolling chassis, rebuilt/restored vehicles and more.

12420 North Station Road, Columbia Station, OH 44028

 
Contact Us Mon-Fri 8am-5pm EST
(866) 236-5031
Email inquiries power@clevelandpap.com

Get the latest updates from Cleveland PAP

  


Choose Language:

Instagram

© Copyright 2020 Cleveland Power & Performance. All Rights Reserved.
Made with pride in Cleveland, OH USA.